Orbegozo RRW 600 Mode D'emploi page 40

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RRW 600 1200 1500 2000
● This display shows Day 1, Comfort mode temperature 24ºC and the square is flashing at the sun
symbol between 0:00 and 1:00, which means it runs on Comfort mode between 0:00 and 1:00 on
Monday.
● On this mode, we can set Comfort or Economy temperature according to our requirements by
pressing button + or –.
Temperature Compensation:
Due to the characteristics of the appliance, the temperature is measured on the lower part of the
radiator, being perfectly adjusted in relation to the Comfort temperature selected by the user.
However, it is also possible to set the "Temperature Compensation" manually.
Room temperature recorded - Comfort temperature indicated = Value...
For example:
22ºC in a room temperature measured with the thermometer when the Comfort temperature required
on the thermostat (indicated) is 20ºC.
The temperature compensation value is 22 – 20 = +2ºC
The user must enter +2ºC on the temperature compensation menu.
Step 1 : Turn the thermostat to the Off position by pressing the button
Step 2: By pressing button M and holding for for 5 seconds, we will enter this menu where the display
shows 0.0
Step 3: Press buttons + or - to adjust fractions of 1ºC
Step 4: Press button M to confirm and return to the OFF position.
Step 5: Switch on the heater by pressing the button
:
Child lock
The user can make sure that nobody changes the set programming,by locking the control panel.
This function is very useful for public buildings or for preventing children from tampering with
the controles.
It is done by pressing the button + and the button - simultaneously for 5 seconds.
Unlocking is done in the same way.
Open Window Detection:
This function makes it possible to detect an open window and automatically activate the anti-freeze
operating mode.
It is done by pressing the button
appears. If a temperature drop is observed in the room during the normal function, the anti-frost
mode is automatically activated to save energy consumption, and the symbol
and M simultaneously for few seconds, till the symbol
.
starts to flash
40

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rrw 1200Rrw 1500Rrw 2000

Table des Matières