Kensington Air Guide D'instructions page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Setting Up Your Adapter's AUTO Function
Warning! The Ignition Key/Switch may be required to be turned to the
Auxiliary Power (ON) position for the Vehicle Power Port to be active!
Do not leave your vehicle unattended with the Ignition Key/Switch turned ON.
Warning! Use caution when removing your vehicle's cigarette lighter plug
from its socket!
The cigarette lighter may be hot and could burn your skin or ignite flammable materials.
Allow the lighter to completely cool before storing it is a safe place.
1
Connect your Adapter to the power source by inserting the end of the Air • Auto
Input Cable firmly into the vehicle power source.
Setting Up Your Adapter's AIR Function
Warning! Only 75 Watts of continuous power will be available from an
Airline Power Port!
This is for your and the other passenger's safety. If your notebook requires more than
75 Watts of power it may not work onboard an aircraft. Some notebooks requiring
more than 75 Watts may still function, but switch between "powering/charging" and
"battery" and suffer from a decrease in performance. Try removing your battery pack
and select a power conserving scheme to enable you to work during your flight.
1
Locate the Vehicle Power Adapter on the end of your Air • Auto Input Cable. Push
down on the Tab as shown below, and pull the Vehicle Power Adapter free from the
Airline Power Adapter.
4

Publicité

Table des Matières
loading

Table des Matières