Programme Selection; Volume Adjustment; Changing The Input Source - Saba SB32HDS195 Manuel D'utilisation

Basic Operation
•
Select the antenna type
Press the ▲/▼
your choice.
NOTE:
 If the TV doesn't receive any channels, please check your aerial connection or the
country you selected, and then try an auto search again.
 If the TV just receives some of the channels, it means the aerial's reception isn't good
enough and an antenna service is recommended.

Programme Selection

• Using the
Press P to increase channel number.
Press P to decrease channel number.
Using 0- 9 Digital Buttons.
•
You can select the channel number by pressing 0 to 9. Example:
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.

Volume Adjustment

• Press the +
• If you want to switch the sound OFF, press the
• You can release mute by pressing the

Changing the Input Source

1. You can select the input source by pressing the SOURCE (
control.
2. Press the arrow button to cycle through the input source, and press the OK button to
confirm your choice.
buttons to select the tuning modes and press the OK button to comfirm
on the remote control.
- on the remote control to adjust the volume.
.
or increase the volume.
19
) button on the remote