Other Commands - Ryobi P760 Manuel D'utilisation

Bond button
Hold a few
Add / Delete
seconds
— Auto Add
Green Mode
1 Click
2 Clicks Amber Mode
Bond button
3 Clicks Mute
4 Clicks Red Mode
Factory Reset
6 Clicks
Make a Cluster
Hold during
power on of Receivers
OPERATION
ESSENTIALS
Command
Manually add/delete the current transmitter to/
from your Green List
SKAA will automatically add the current Amber
®
transmitter to your Green List if you listen to it for
30 minutes
Rotate through your list of favorite transmitters
(Green List) — when a favorite transmitter is
found, the search stops and audio plays from that
transmitter
Explore for new, unknown transmitters (ones which
are not already on your Green List)

OTHER COMMANDS

Command
Do again to Unmute; any Click command will first
Unmute and then do its function
If you have 2 or more transmitters on your Green
List, power on just the one you want to hear and
it plays automatically.
Clear Green List. Start Over!
1. Power off all transmitters and receivers
2. Choose the desired Primary receiver in the
cluster of receivers.
3. Power on the Primary receiver while holding
down its Bond Button—hold the button down
until the Indicator begins to flash Red
4. With the remaining receivers within 3 meters of
the Primary receiver, power on the first one, wait
for its Indicator to flash Red and then power on
the second one; continue until all of them are
powered on
5. Once all of the Indicators stop flashing (turn solid
Red), power off all of the receivers
9 - English
Indicator Meaning
= Added
Yellow to
Green
Red (flash)
= Deleted
Yellow to
= Added
Green
= Hunting
Green (dim)
= Next one
Green (flash)
= Bonded
Green (bright)
= Hunting
Amber (dim)
= Bonded
Yellow
Indicator Meaning
(slow flash)
Yellow,
= Muted
Green, or
Red
Red (dim)
= Hunting
Red (bright)
= Bonded
Reset Done
Red (flash)
Receiver has
entered
Red (flash)
"Cluster Up"
mode
The Cluster has
Red (bright)
been success-
fully made