THOMSON TT200BT Manuel D'utilisation page 10

1. Dust cover
2. Bluetooth button
3. Power button
4. Power ON LED indicator
5. Bluetooth LED indicator
6. Turntable lock screw
7. Alignment screw with rubber cover
8. Counterweight
9. Pitch control knob
10. Speed selector
11. Cueing lever
12. Tonearm lock
13. 45 pm record adapter
14. Line out socket (L/R)
15. AC power cord
Caution:
Using controls and making adjustments or conducting procedures other than those specified herein may
result in hazardous exposure to radiation.
This unit should only be modified or repaired by qualified service personnel.
Connecting the turntable
1. Connect the power cord (15) to an AC outlet.
2. Plug line-out RCA connectors into the line out socket (14) located on the back of the unit and to your
external amplifier to listen to the music.
3. Press the power switch (3) to turn on the unit. The power ON LED indicator (4) will light up. The
turntable is now ready to play your music. Please refer to the "Operating the turntable" section of
this manual for details.
Installing the counterweight
1. Slide the counterweight (8) to the front of the tonearm. Turn it clockwise until it clicks into
2. Turn the counterweight clockwise and push it back onto the rear of the tonearm, until it reaches the
white line, as shown in figure 2.
3. Turn the anti-skate dial to the "1" position.
4. Turn the counterweight anti-clockwise and push it to the front of the tonearm until the right tracking
force is obtained.
PARTS / BUTTONS
2
place.