Removal Tool - Princess 01.182065.01.001 Mode D'emploi

Fat collecting/baking tray
• Always place the fat collecting tray in the lower rails of the
cooking space to collect dripping fat, food residues or crumbs. It
can also be used as a baking tray by placing food on it, place the
baking tray in the middle rails.

Removal tool

• Use the removal handle to take out the rotating basket from the
cooking space by pressing the handle and secure it in the handle
holder.
• Lift the rotating basket gently out of the cooking space and put it
on a heat-resistance surface.
Rotating basket
• The rotating basket can be used to prepare chips or other potato
products, pieces of vegetables, meat and frozen products like
chicken nuggets or squid rings.
• Don't overfill the basket with ingredients, if it's to full, the food will
not cook evenly.
• Close the basket and ensure that it is shut correctly so that it
can't open during use.
• Toggle the red switch to the right. Insert the left side of the
rotating basket into the cooking space. To do this, plug the left
end of the shaft as far as it will go into the round holder on the left
side of the cooking space into the lock position.
• Then hang the right end of the shaft into the support on the right
side of the cooking space.
• Release the switch to lock the basket into place.
1
1
3
2
2
Instruction manual
EN
3
5