LEAD dynamic CDC Manuel D'utilisation page 6

ENGLISH
1.4 Your luminaire will flash once to confirm that it
has been assigned to the selected zone and can now
be controlled using your remote control unit.
2.2 Dimming
Dim your luminaire by adjusting the dimming level
using both 'dim' buttons.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
2
2.1 ON/OFF
Press one of the buttons 1-4 for more than 2 seconds
to switch the luminaires you have assigned to this
zone on or off. You can assign any number of lumi-
naires to a zone.
1.
2.3 Save scenes
You can assign your zones up to 3 different scenes.
Select a zone 1-4 then the required dimming level
using the dimmer wheel and save it as a scene by
holding down a scene button (S1-S3) for at least 2 sec-
onds. Your luminaire flashes once as confirmation.
Subject to errors and amendments
Control
> 2 sec.
2.
Information / Technical support: www.lead-energy.com