Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. TROUBLE SHOOTING

Please read this user's manual carefully before using the Wireless Surveillance System. If
you still have difficulties to use the Wireless Surveillance System consult the following
syndrome, which will guide you to solve most common problems.
Interference in the Image and Sound
Move your Wireless Camera or Receiver slowly to find a best reception position.
Shorten the distance between your Camera and Receiver.
Check if there is any interference radio frequency source near your Receiver source
such as microwave oven or others 2.4 electronic products.
Switch channels of both Camera and Receiver to another channel; e.g. from CH1to
CH3.
No Pictures or Sound Power
Check ON/OFF switch in right position.
Check the DC adaptors rightly connected.
Check all the cables well and rightly connected.
Check the channels of wireless camera and receiver at the same one.
Receiver can not work properly when connecting with PC
Check PCI capture card and software/ driver installed correctly.
Check all the cables well and rightly connected when connecting with PC.
Make sure the surveillance system work properly if connecting with TV.
How to adjust the Channel Selector of Wireless
Use a tool to open the channel rubber.
Switch inside selector by the tool to adjust the channel you want to set.
11
English

Publicité

Table des Matières
loading

Table des Matières