Operation - Zodiac Security CMOS Manuel D'utilisation

5. OPERATION

1. Turn on the Wireless Camera and Receiver.
2. The power indication LED on Wireless Camera and Receiver will light up.
3. Turn on A/V display.
4. Check the channel of Receiver to be same as Camera.
(Camera set up to channel 1 originally.)
•
Switch the Receiver's Channel Selector to Ch1.
•
Image will show on A/V display if the channel of Wireless Camera and Receiver is at
the same one.
•
If no images or sound on A/V display, switch the Receiver's Channel Selector to Ch2, 3
or 4; and check the images again.
•
If switching the channel of Wireless Camera is necessary, please refer to page 10 -
How to adjust the Channel Selector of Wireless Camera.
5. Wireless Surveillance System watches wherever you want.
Note: The operation temperature is from -15 C ~ +55 C.
10
English