Using The Garden Spray; Cleaning; Storage/Wall Mounting - FLORABEST FSTK 10 A1 Traduction Des Instructions D'origine

Using the garden spray

The spray nozzle
water spray settings .
The flow rate can be regulated
continuously from closed
open .
Fit the garden spray into the hose
♦
connection
Move the rocker
♦
start and regulate the water flow .
The rocker
flow if you close it completely .
Use this function only for a tem-
porary interruption of the water
flow . Never leave the hose pipe
unattended in such cases .
By turning the spray nozzle
♦
you can adjust the water jet .
NOTE
When you remove the garden
►
spray from an open tap, the
hose connection
aquastop) stops the water flow .
Use this option to stop the
water flow only if you want to
connect another element to the
hose, e .g . a garden sprinkler .
Turn off the tap while connect-
►
ing any element that requires
you to remove the hose connec-
tion with the aquastop .
FSTK 10 A1
has 3 different
to
(with aquastop) .
forwards to
can stop the water
(with
CAUTION!
Only use the described option
►
to stop the water flow for short
periods .
If you want to stop the water
flow for a longer period, turn
off the tap .

Cleaning

Clean the housing with a slightly
♦
damp, lint-free cloth .
Clean the connections from time
♦
to time to ensure a tight fit .

Storage/wall mounting

Carefully drain the hose and the
♦
valves . Store the product in a
frost-free location to prevent any
,
frost damage .
NOTE
The wall mounting is used only
►
for storing the hose reel
a wall .
As soon as the hose reel
►
tached to a wall, it must no longer
be used . The hose reel
come off the wall during use .
on
is at-
could
GB │ IE │ NI │ 5 ■