Linea 2000 DOMO DO914K Mode D'emploi page 46

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
DO914K
scraped off, then thaw the freezer as follows:
1. Unplug the appliance.
2. Remove all the food from the freezer. Caution: once the food is defrosted, you can
not freeze it again.
3. Leave the door of the freezer open and place a container at the bottom of the
appliance to catch the thaw water.
4. Dry the appliance thoroughly when the defrosting process is finished.
5. Plug in the appliance, so that the appliance can start working again.
Replacing the light bulb
Caution: unplug the appliance before replacing the light bulb!
The specifications of the light can be found on the rating label on the appliance.
To replace the light bulb:
1. Set the thermostat knob to 0 to switch off the
appliance.
2. Unplug the appliance.
3. Remove the screw from the lamp cover and remove
the cover.
4. Unscrew the light bulb.
5. Screw in a new light bulb and place back the cover with the screw.
6. Plug in the appliance.
46

Publicité

Table des Matières
loading

Table des Matières