Filling The Tank; Initial Start-Up; Steam Ironing - Termozeta milord 6000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
GUIDE TO IRONING
Fig. B

FILLING THE TANK

• Always make sure the plug is disconnected from the power outlet when
carrying out this operation.
• Make sure the steam control button (4) is in the
• Open the lid (3) and fill the tank without going over the MAX level (12) indicated
on the tank (11). Never place perfuming substances in the tank.
• Close the lid (3).
Recommendations:
If the water in your area is particularly calcareous, we recommended using distilled
water.

INITIAL START-UP

• Make sure the steam control button (4) is in the
• Place the iron in a diagonal position, completely unwind the power cord (8) and con-
nect the plug to the power outlet.
• With the temperature control knob (9), select the temperature most suitable to the
type of fabric to iron (see table 2 in fig. B).
• The thermostat light (7) will turn on. It will then turn off when the selected tempera-
ture is reached. The iron is now ready to use.
Important:
• Never leave the iron unattended when it is connected to the power outlet.
• The iron must be used and left in the rest position (e.g. during ironing pau-
ses) on a stable surface.
• Do not use the iron if it has been dropped, if there are signs of damage or if
water leaks from the soleplate.
Recommendations:
• First iron the most delicate fabrics that require low temperatures and then move
onto more resistant fabrics that require higher temperatures
• Before ironing run the iron over a small hidden area of your garment to make sure
the temperature selected is suitable to the type of fabric.

STEAM IRONING

• Fill the tank (11) with water.
• Select the desired steam output via the steam control button (4).
Note:
• Only discharge the steam if the knob (9) is positioned towards the ••• MAX symbols.
• The steam production is interrupted automatically when the iron is positioned verti-
cally during a pause in ironing.
• Drops of water may be discharged together with the steam on first use. This is nor-
mal. Before ironing your clothes and household linen carry out tests on an old piece
of fabric.
max
•••
ENGLISH
High temperature steam
ironing (cotton, linen)
Medium temperature
ironing (wool, silk)
Low temperature ironing
(synthetic fibres)
position (dry ironing).
position (dry ironing).

Publicité

Table des Matières
loading

Table des Matières