Emptying The Dust Chamber; Inserting The Filter Unit - Vorwerk VC100 Mode D'emploi

16
Fig. 4.10 Emptying the dust chamber
2
5a
Fig. 4.11 Inserting the filter unit
Maintenance
4.2

Emptying the dust chamber

• Remove the filter unit (see section 4.1 on page 15).
• Empty the contents of the dust chamber
• Where required, clean the dust chamber with a damp cloth and allow the dust
chamber to dry completely before assembly.
1
4.3 Inserting the fi lter unit
When inserting the fi lter unit
1
points towards the release key
• Keep the release key pressed down and push the filter up to the stop in the
dust chamber.
5

into a bin.

ensure that the larger tray of the fi lter unit
 
on the dust chamber
5a
.