Spare Parts; Guarantee; Repair Service; Technical Data - Grizzly Tools EHS 500-45 Traduction De La Notice D'utilisation Originale

GB
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that
are used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details
We will dispose of the defective equip-
ment you send in, free of charge.

Spare Parts

Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you have any other questions, contact the
"Service-Center" (see "Service-Center").

Guarantee

This unit has a guarantee period of 24
months. This equipment is not suitable for
commercial use.Commercial use will invali-
date the guarantee.
The guarantee does not include dam-
ages that are attributable to natural wear,
overloading or inappropriate use. Certain
component parts are subject to normal wear
and are excluded from the guarantee. In
particular, cutter bars, eccentric drives and
carbon brushes are included here, providing
the complaints cannot be attributed to mate-
rial defects.
Furthermore, a condition of the guarantee
services is that the maintenance intervals
indicated in the operating instructions
have been observed and the instructions
for cleaning, care and maintenance have
been followed. Damages due to material
or manufacturer faults will be repaired free
of charge by replacement delivery or re-
pair. However, this is conditional upon the
56
unit being returned complete and assem-
bled to our Service Centre, together with
proof of purchase and guarantee slip.

Repair Service

Repairs that are not covered by the guar-
antee can be carried out by our Service
Centre for a fee. Our Service Centre will
be happy to provide you with a cost esti-
mate. We can deal only with equipment
that has been packaged correctly and
which has been sent to us with the correct
postage paid.
If you have a justified guarantee claim,
please contact our Service Centre by
telephone, from which you will then be ad-
vised on how the claim will be processed.
Caution: The sender shall bear the cost of
any material damages during transport.
In case of complaint or for servicing,
please send your equipment cleaned and
with an indication of the defect, to our ser-
vice address.
Equipment sent in with freight collect
– by bulk freight, express or with other
special freight – are not accepted.
We can dispose of your equipment free of
charge.

Technical Data

Electrical hedge trimmer ..... EHS 500-45
Input voltage rating ......230-240 V~, 50 Hz
Input power ..................................... 500 W
Safety class .........................................
Protection category........................... IP 20
Knife movements per minutes ..1700 min
Weight .............................................2,3 kg
Length of blades ...........................450 mm
Cutting length ...............................410 mm
Cutting capacity ..............................16 mm
Acoustic power
level (L ) ........... 101 dB (A); K
WA
II
-1
=3.24 dB
WA