Check The Parts - Sony SU-PF2 Mode D'emploi

The following instructions are for
Sony service representatives only.
Be sure to thoroughly read the safety precautions described above and pay special attention to safety during the
installation, maintenance, checking, and repair of this product.
Be sure that two or more persons do the installation work.
Be sure that two or more persons install the TV on the Floating Stand. If one person does the installation work
alone, this may result in an accident or injury. Be sure to keep children away during the installation.
Be sure to assemble the Floating Stand securely
following the instructions.
If a screw is not tightened securely, or it is dropped, the Floating Stand may topple
over. This may cause damages or injury.
Be sure to install the TV securely following the instructions.
Tighten the screws securely. If the TV is not installed securely, it may fall and cause injury.
Be careful not to hurt your hands or fingers during installation.
Be careful not to hurt your hands or fingers when assembling the Floating Stand and installing the TV.

Check the parts

Name
Bottom plate
Pillars with a glass panel
Be sure to have a Phillips screwdriver that fits the screws indicated above prior to the assembly.
6
(US)
Quantity Name
Cable cover (for pillar)
1
Cable cover (for bottom plate)
1
Screw (large)
Screw (small)
Quantity
2
1
2
4