Adjusting The Handlebar - Sunny SF-B1002 Manuel De L'utilisateur

DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet from
the pedals until the pedals have stopped completely. You can
stop the flywheel at anytime by pushing down on Tension Knob
(No. 47).

ADJUSTING THE HANDLEBAR

Loosen the [handlebar] Adjustment Knob (No. 16) to raise or
lower the handlebar to the desired position. Make sure the
Adjustment Knob (No. 16) settles into the desired hole and
secure it firmly by turning clockwise.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snugly in the toe clip cage. Rotate one foot to within
arm's reach and pull the strap until the toe clip cage fits your shoe
snugly. Insert the strap back into the hoop of the toe clip. Repeat
this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly
secured. If the handlebar is loose, tighten the Adjustment Knob
(No. 16) to secure it. Next, stand at the front of the bike so that
you're directly in front of the handlebar. Firmly grasp and hold
each side of the handlebar, place one foot on the front stabilizer
and tilt the bike towards you until the transportation wheels on
the front stabilizer touch the ground. With the wheels on the
ground, you can transport the bike to the desired location with
ease.
13