Sunny SF-B1002 Manuel De L'utilisateur page 13

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669).
#79 S13-15 1PC
2
8
16
16
#19 M10*25*S6 2PCS
#20 d10*Φ20*1.5 2PCS
19
20
26
1
#77 S6 1PC
3
4
16
1
STEP 4:
STEP 4:
Loosen and remove the [seat post] Adjustment
Loosen and remove the [seat post] Adjustment
Knob (No. 16). Insert Seat Post (No. 2) into the
Knob (No. 16). Insert Seat Post (No. 2) into the
sleeve located on the back of the Main Frame
sleeve located on the back of the Main Frame
(No. 1). Adjust the Seat Post (No. 2) to the
(No. 1). Adjust the Seat Post (No. 2) to the
desired position and reinsert and tighten
desired position and reinsert and tighten
Adjustment Knob (No. 16) to secure the post
Adjustment Knob (No. 16) to secure the post
in place.
in place.
Loosen and
Loosen and
Adjustment Knob (No. 16). Insert Seat Slider
Adjustment Knob (No. 16). Insert Seat Slider
(No. 8) into the Seat Post (No. 2). Adjust the
(No. 8) into the Seat Post (No. 2). Adjust the
Seat Slider (No. 8) to the desired position and
Seat Slider (No. 8) to the desired position and
reinsert and tighten Adjustment Knob (No. 16)
reinsert and tighten Adjustment Knob (No. 16)
to secure the post in place.
to secure the post in place.
Secure Seat (No. 26) to the Seat Slider (No.
Secure Seat (No. 26) to the Seat Slider (No.
8).
8).
NOTE: Before you fully tighten the seat, you
NOTE: Before you fully tighten the seat, you
can adjust the front of the seat higher or lower
can adjust the front of the seat higher or lower
to meet your needs.
to meet your needs.
STEP 5:
STEP 5:
Loosen and
Loosen and
Adjustment Knob (No. 16). Insert Handlebar
Adjustment Knob (No. 16). Insert Handlebar
Post (No. 4) into the sleeve located on the front
Post (No. 4) into the sleeve located on the front
of the Main Frame (No. 1).
of the Main Frame (No. 1).
Handlebar Post (No. 4) to the desired position
Handlebar Post (No. 4) to the desired position
and reinsert and tighten the Adjustment Knob
and reinsert and tighten the Adjustment Knob
(No. 16) to secure the post in place.
(No. 16) to secure the post in place.
Secure Handlebar (No. 3) to Handlebar Post
Secure Handlebar (No. 3) to Handlebar Post
(No. 4) using 2 Screws (No. 19) and 2
(No. 4) using 2 Screws (No. 19) and 2
Washers (No. 20). Tighten and secure with
Washers (No. 20). Tighten and secure with
Spanner (No. 77).
Spanner (No. 77).
The assembly is complete!
The assembly is complete!
11
remove the [seat
remove the [seat
remove the [handlebar]
remove the [handlebar]
Adjust the
Adjust the
slider]
slider]