verse INSIDER Série Manuel De L'utilisateur page 9

INSIDER User's Guide
ON OFF
Table 1 − each DIP−switch cuts or boosts a frequency by a
fixed factor.
Plot of the frequency response of the user equalizer. The curves show the cut/boost given by each
switch when turned ON, for example the dashed and plain curves at 70Hz represent respectively the
boost given by switch 1 and switch 2. If all the switches are OFF the frequency response is flat.
NOTE: The boost amount is not cumulative. For bettere results turn ON
only one switch for every frequency band. For example: the switches 4 and
3 wich work on the 1.2KHz band, shouldn't be turned ON together.