Looking After The Product; Connecting To The Mains; In Case Of Malfunction - verse INSIDER Série Manuel De L'utilisateur

T
HANK YOU FOR CHOSING A
T
HIS GUIDE WILL GIVE YOU INFORMATIONS AND USEFUL TIPS FOR A CORRECT USE OF YOUR
I .
NSIDER SYSTEM
T VERSE
HE STAFF WISHES YOU

LOOKING AFTER THE PRODUCT

• Never apply excessive force to the structures or controls (knobs, switches).
• Do not stress the speaker in transit or during use.
• Do not place the device close to heat sources, in damp or dusty places or
close to strong magnetic fields.
• When possible, do not place the speaker close to units which generate strong
interference, such as radio and TV sets, monitors, etc.
• Never insert objects or liquids of any kind inside the device, for any reason.
• Clean using a soft brush or an air jet only; never use detergents, solvents or
alcohol.
• When disconnecting cables from sockets, always take hold of them by the
connector and not by the cable itself, and when winding take care to avoid
knots or twisting.
• Do not expose the speaker to direct sunlight.

CONNECTING TO THE MAINS

• To avoid the risk of electric shock, do not make connections with wet hands.
• Make sure that the mains voltage is the same as that indicated on the control
panel.
• Connect the speaker to a mains socket with earth contact.
CONNECTING TO A MIXER
• Always use good quality screened cables.
• Before making the connections, check that all the speakers you are about to
connect are switched off. You will avoid noisy, if not hazardous, signal peaks.

IN CASE OF MALFUNCTION

• In case of malfunction, contact only an authorised service centre.
INSIDER User's Guide
VERSE I
NSIDER SERIES PRODUCT
G
OOD WORK
.
... HAVE FUN!
AND