Publicité
Les langues disponibles
Les langues disponibles
Function and features
In conjunction with a control monitor the through-beam sensor detects
objects and materials without contact and indicates their presence by
a switched signal.
• For connection to aplifier type OV110 or OV310
• Range: 1m
Electrical connection
Voltage supply to EN50178.
Isolate power, then connect the unit as follows:
OV 110
RD: red; WH: white
Installation
Fix the receiver (type OEE-V) in
position. Align the transmitter
(type OES-V) towards the receiver
(safe switching of the amplifier
must be guaranteed); tighten in
the same way.
Maximum range is only possible
with precise alignment.
Operation
Check the safe functioning of the through-beam sensor.
Maintenance: Keep the lens of the sensor free from soiling.
1
RD
2
screen
3
WH
screen
4
5
6
transmitter
OV 310
RD
1
screen
2
WH
3
screen
4
5
6
7
8
receiver
3
Publicité
