Epson Stylus NX530 Guide Rapide page 30

■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the product. Note that there is a valve in the ink supply
port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining
items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding
area. Do not store cartridges upside down.
■
Shake new ink cartridges four or five times before opening their packages.
■
Do not remove or tear the label on the cartridge; this can cause leakage.
■
Install the ink cartridge immediately after you remove it from its package. If you leave a
cartridge unpacked for a long time before using it, normal printing may not be possible.
■
Do not disassemble or remodel the ink cartridge, otherwise you may not be able to print
normally.
■
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room
temperature for at least three hours before using it.
■
Store ink cartridges in a cool, dark place.
■
Do not touch the green IC chip on the side of the cartridge. Doing so may prevent normal
operation and printing.
Wireless Network Safety
■
Do not use this product inside medical facilities or near medical equipment. Radio waves from
this product may adversely affect the operation of electrical medical equipment.
■
Keep this product at least 8.7 inches (22 cm) away from cardiac pacemakers. Radio waves from
this product may adversely affect the operation of cardiac pacemakers.
■
Do not use this product near automatically controlled devices such as automatic doors or fire
alarms. Radio waves from this product may adversely affect these devices, and could lead to
accidents due to malfunction.
Memory Card Safety Instructions
■
Use only compatible memory cards (see the User's Guide for a detailed list).
■
Do not remove a memory card or turn off the product while the memory card light is flashing.
30
Notices