Parrot Bluegrass Fields Guide Utilisateur page 18

The charge time is about 2 hours and 30 minutes for a
flight time of about 25 minutes.
INSTALLING THE BATTERY INSIDE
THE PARROT BLUEGRASS
1. Remove the battery compartment's cover from the
back of the drone.
2. Slide the battery inside the compartment, keeping
its wires outside and to the left.
3. Close the battery compartment's cover, leaving the
wires out through the cover's aperture.
4.
Connect the black wire to the Parrot Bluegrass
connector.
5.
The Parrot Bluegrass emits a triple tone: it is ready
to be powered on.
CHARGING THE PARROT
SKYCONTROLLER 2 BATTERY
1.
Select the adapter appropriate for your country and
attach it to the charger.
2.
Connect the charger cable to Parrot Skycontroller 2,
then plug the charger to the mains.
3.
When the charger's control light turns from red to
green, the charge is complete.
18