Publicité
Les langues disponibles
Les langues disponibles
This user manual should be read carefully as it contains important notes on the safety, use and
maintenance of your device.
Keep it in a safe place and transmit it if the device changes ownership
1. TECHNICAL DATA
Material
Lighting modes
T ° Color
Angle / Zone Detection
Guarantee
Loading time
2. INSTALLATION
Notice :
1. This is a solar light, install it in a place where it will be able to get enough light to function properly.
2. Note that the lighting time depends on the time of exposure to light and brightness (clouds, rain, sun ...).
3. Fully charge the device before first use.
4. If the LED lights start blinking repeatedly, this indicates that the unit is weak and needs to be recharged.
5. When the sun is limited, the product takes longer to recharge completely.
Distribué par / Distribuito da / Distributed byNETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
Product
Color
Lumens
IP
1. Drill three holes where the lamp will be installed and insert the
expansion dowels.
2. Screw the expansion screws (1) into the floor, then use the nut (3)
to secure the hanging board (2) to the floor.
3. Install the round plate (4)
SO16
BLACK
Aluminium
2 different lighting modes
4000K
260Lm
2-4 meters
IP65
2 years
Around 6 hours
EN
Publicité
