Signal Connection - Conrad mivoc Hype 10 Notice D'emploi

Signal Connection

Only use suitable shielded cinch connection cables or speaker cables for connection to the
cinch input. Using other cables may lead to interferences.
To avoid distortions or mismatches that may damage the device, the cinch inputs must only be
connected to devices with cinch outputs. Only audio device speaker outputs must be connected
to the speaker inputs.
The subwoofer can be connected via the cinch or speaker inputs. Never use both connection
types at the same time.
The connection cables must not be squeezed or damaged by sharp edges.
Before connecting the subwoofer, switch off both the subwoofer and any devices connected
to it and disconnect them from the mains.
Proceed accordingly when changing the set-up.
26