AEG FAVORIT 88060 VI Notice D'utilisation page 32

32
SETTING THE TIME BEAM
COLOUR
Nine colours are available for this light
beam. You can change the colour or
deactivate it.
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to 'SETTING
AND STARTING A PROGRAMME'.
3. Press and hold touchpads (4) and
(5) at the same time until the indica-
tors of touchpads (3), (4), (5) and (6)
flash.
4. Press touchpad (6).
• The indicators of touchpads (3),
(4) and (5) go off.
• The indicator of touchpad (6)
continues to flash.
• The display shows a number and
the letter C. Each number is rela-
ted to a different colour (0C =
Time Beam deactivated).
5. Press touchpad (6) again and again
to change the colour.
6. Deactivate the appliance to confirm.