Maintenance And Care; Warranty; Eu Declaration Of Conformity; Disposal - Glatz CASTELLO Pro Notice De Montage Et D'utilisation

Maintenance and care

• In most cases, defective parasols can be repaired by your GLATZ
partner. Only use original spare parts provided by GLATZ.
• Wipe the radiant heater unit from time to time with a damp, non-abra-
sive cloth. The radiant heater unit must not be immersed in liquids.
24 25

Warranty

Always contact your GLATZ partner first before sending in the product.
The warranty period amounts to 24 months from the date of purchase.
The warranty shall become null and void in the following cases:
• Due to external force
• Incorrect use and maintenance
• Damage due to force majeure

EU Declaration of Conformity

We, Glatz AG, Neuhofstrasse 12, CH-8500 Frauenfeld, SWITZERLAND,
hereby declare that this product complies with the directives of the
European Community. The applicable declarations of conformity can be
found on our Download area at www.glatz.com.

Disposal

This symbol on the product, the accessory parts or on the
packaging indicates that the product must not be treated as
unsorted municipal waste, but must be disposed of separately.
Dispose of the product at a designated collection point for recy-
cling. The disposal of electrical and electronic equipment within
the EU and in other European countries takes place through collection
points that have separate collection systems for electrical and electronic
equipment.
By properly disposing of the product, you are helping to prevent potential
environmental and health hazards that can be caused by improper han-
dling of old equipment. The recycling of materials contributes towards
the conservation of natural resources. Therefore, do not dispose of old
electrical and electronic equipment via the unsorted municipal waste.
The packaging is made from environmentally friendly materials that can
be disposed of in your local recycling facilities. By properly disposing of
the packaging and packaging waste you are helping to prevent potential
environmental and health hazards. The product consists of metal and
synthetic parts. Disposal at the end of the product's service life must
be performed in accordance with the regional environmental and waste
regulations.