AFG PRO 7.2 Ai Manuel Du Propriétaire page 9

TOOLS INCLUDED:
F 5mm L Wrench
F 6mm L Wrench
F 8mm L Wrench
F 13/17mm Flat Wrench
PARTS INCLUDED:
F 1 Console
F 1 Console Mast
F 1 Water Bottle Holder
F 1 Main Frame
F 1 Audio Adaptor Cable
F 2 Handlebar Caps
F 2 Upper Handlebars
F 2 Lower Handlebars
F 2 Swing Arms
F 2 Link Arms
F 2 Pedal Arms
F 2 Rear Uprights
F 2 Top Hand Rails
F 1 Power Cord
F 2 Joint Covers
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the incline trainer
carton on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in
place and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
NEED HELP?
If you have questions or
if there are any missing
parts, contact Customer
Tech Support. Contact
information is located on the
back panel of this manual.
9