Programmed Play - AEG SR 4327 Mode D'emploi

English
44
NOTE:
• In the case of CDs in MP3 format that contain fol-
ders, when the device changes to a diff erent folder
001 appears for the fi rst track of the new folder.
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol „- - -" and the word „no"
appear in the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and
CD media available.
Description of the CD buttons
II (12)
Pressing briefl y:
You can briefl y interrupt and resume playback using this
button. The symbol fl ashes in the display. Pressing
again continues playback.
Pressing for a longer time:
Selects the USB connection or card slot.
SKIP+/SKIP- (9/11)
With an audio CD or a CD in MP3 format playing:
With SKIP + you can jump to the next or previous track
etc.
• If the button is kept pressed down, the machine
starts to search through the tracks.
The SKIP - button can be used as follows:
Press once = This starts the current track again
from the beginning.
Press twice = This jumps back to the previous
track.
Press three times = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks.
NOTE:
In the case of CDs in MP3 format that contain folders,
when the device changes to a diff erent folder 001
appears for the fi rst track of the new folder.
STOP (10)
The CD stops.
MODE (15)
With an audio CD or a CD in MP3 format playing:
Press once = (the REP emits a fi xed light) the cur-
rent track is repeated continuously.
05-SR 4327 AEG.indd 44 05-SR 4327 AEG.indd 44
Press twice = (the
the whole CD is played continuously.
Press three times = the display contains the word RAND
and the track number that is to be
played fi rst. All tracks are played
back in random order.
Press four times = all functions are cancelled. The
normal play mode is resumed.
Only for CDs in MP3 format
Press once = the current track is repeated
continuously (REP appears in the
display).
Press twice = the selected folder of the MP3 CD
is repeated continuously (REP
ALBUM appears in the display). Use
the ALBUM button (17) to select
individual folders.
Press three times = the whole CD is played continuously
( ALL appears in the display).
Press four times = the display contains the word RAND,
MP3 and the track number that is to
be played fi rst. All tracks are played
back in random order.
Press fi ve times = the function is deactivated and the
CD is played in the normal mode.
ALBUM (17)
Press this button during playback to change to a higher
folder. The display, e.g. ALBUM 001, fl ashes briefl y. Then
the CD begins to play back automatically. If the button is
pressed in stop mode the display also fl ashes. Then start
playback with the II button.

Programmed Play

This can be used to program any desired sequence of
tracks.
1. Press the STOP key (10).
2. Press the PROG key (16). The number „P01" (storage
location) and the symbol PROG fl ash in the display.
Use the SKIP+/SKIP- buttons (9/11) to select the
desired track and then press the PROG button again.
The display changes to memory slot P02.
NOTE:
• In the case of CDs in MP3 format, press the AL-
BUM button (17) in order to change the folder.
• In the case of CDs in MP3 format that contain
folders, when the device changes to a diff erent
folder 001 appears for the fi rst track of the new
folder.
3. Select the next track with the SKIP+/SKIP- key and
press the PROG key again. Repeat the procedure until
all the desired tracks are selected.
ALL emits a fi xed light)
23.03.2009 14:32:36 Uhr 23.03.2009 14:32:36 Uhr