Western Co WRM15 dualB Manuel De L'utilisateur page 21

Battery Type:
@12V @24V
Flood Flood
Seal Seal
Lithium 14.0V Lithium 24.0V
Lithium 14.1V Lithium 24.2V
Lithium 14.2V Lithium 24.4V
Lithium 14.3V Lithium 24.6V
Lithium 14.4V Lithium 24.8V
Lithium 14.5V Lithium 25.0V
Lithium 14.6V Lithium 25.2V
Lithium 14.7V Lithium 25.4V
WRM15 dualB / WRM15 dualB-E
User manual
Pic. 4 Bluetooth control
Parameters for battery 1:
Description
Pb flood battery with charging end voltage (Veoc) compensated in temperature as in the
diagram of Pic. 6
Pb seal battery AGM/VRLA or GEL with charging end voltage (Veoc) compensated in
temperature as in the diagram of Pic. 6
Lithium ion battery. Please check the manual of the battery used so to select the charging end
voltage more appropriate. When selected the type of Lithium battery the charging end voltage
(Veoc) is not compensated in temperature but is fixed to the selected value.
We recommend to use only Lithium-ion batteries with BMS (Battery Management System)
integrated wiht nominal voltage 12.6V o 25.2V
The BMS of the ha sto ensure the equalization of the cells and the protection on the maximum
voltage of charge and discharge.
Please contact Western CO. to chose the best lithium ion battery to be installed with the
WRM15 dualB.
It is absolutely forbidden to connect WRM15 dualB to lithium batteries witout integrated BMS.
As a matter of fact BMS protects the battery from conditions of anomalous working that might
cause fire on the battery itself.
Settings page: allows to set the working
parameters of the system. Below are
detailed explanations of the meaning for
every single parameter.
7
EN