Aerials
As supplied your clock radio is fitted with a telescopic aerial. Should this
prove inconvenient a separate wire aerial can be fitted in place of the
telescopic aerial.
A spanner is provided to allow removal of the telescopic aerial. The wire
aerial can then be plugged in place of the telescopic aerial.
Note : In areas where signals are weak the wire aerial may not
prove to be as effective as the telescopic aerial.
Specifications
Power Requirements
Mains
AC 230 volts, 50Hz
Frequency Coverage
FM
87.5 - 108MHz
DAB
Band 3 174.928 - 239.200MHz
L Band 1452 - 1492MHz(DCR-209)only
21
Circuit Features
Loudspeaker
only
Output Power
Headphone socket
Aerial System FM
77mm(3 inches), 8ohms
0.9 Watts
3.5mm dia
Telescopic aerial or alternative wire aerial
DAB
Telescopic aerial or alternative wire aerial