EIBENSTOCK EBM 182 Notice Originale page 73

Technical characteristics
Measures:
Length of the column:
Weight:
Max. drilling diameter
:
Inclination
Carriage brake:
Locking in top position:
Fixture of the motor:
Adaptation to surface
Available special accessories:
Wheel axle
Fastening set (concrete)
Fastening set (brickwork)
Spare dowel
Rawl – dowel
Quick action bracing unit
Water suction ring WR 202
Spare seal for water suction ring ED 202 for WR 202
Vacuum pump VP04
Vakuum tube
Vacuum set BST 182 V/S
Diamond drill rig base gasket, fastening screws, Allen screw, turnstile and
operating instructions in a cardboard box.
Application for indented purpose
The diamond drill rig BST 182 V/S is made for diamond core drills with a special
quick connection fixture (e.g.: ETN 162/3 or EBM 182/3).
The max. drilling diameter must not exceed 202 mm.
For overhead drilling an efficient water collection must be used.
In case of wrong handling or misuse, the producer does not assume any
liability.
Item
Supply
350 x 250 x 1050 mm
995 mm
14 kg
202 mm
0° bis 45°
Yes
Yes
quick change connection
4 positioning screws / 2 bubble
levels
12
Order no.
3582B
35721
35724
35722
35725
35730
3587C
3586K
09204
35855
3585F