Publicité
Les langues disponibles
Les langues disponibles
A)
PACK CONTENTS
A connector and its screw fittings
2 headless hexagonal socket screws M8 x 20 (use : see fig. 2b)
This leaflet of instructions for use
B)
USE
The connectors 1K207 and 1K207-HD are designed exclusively for lower limb prosthesis.
They are appropriate for patients weighing (carried load included) less than :
100 kg for 1K207
150 kg for 1K207-HD
C)
CONNECTIONS
These components can be assembled at their both ends to any male pyramid
1
component (
) (1K203, 1K204, 1K205, ...).
D)
TILT ADJUSTMENT
a)
Tilt is adjusted with the 4 screws
(fig. 2a)
b)
If one of the screws is too short, replace it by one of the 20 mm
screws included in the pack (fig. 2b)
c)
Secure tightening by applying Proteor adhesive XC047 on these
screws
d)
Tighten the screws up to a 15 Nm torque.
E)
RECYCLING
This product includes a main item made of aluminium alloy
and screws made of steel. Each of these items must be
recycled according to the laws in force.
ASSEMBLING INSTRUCTIONS FOR
1K207 / 1K207-HD DOUBLE PYRAMIDAL ADAPTER
(fig.1)
(fig.2a et 2b)
(2)
using a 4mm hex wrench
1
Fig. 1
1
Fig. 2a
2
(x4)
Fig. 2b
PROTEOR
6 rue de la Redoute - 21850 Saint-Apollinaire - France
Tél. 33 (0) 3 80 78 42 10 - Fax 33 (0) 3 80 78 42 15
ht.orthopedie@proteor.com - www.proteor.com
1K20799-0818- Page 2/4
Publicité
