Safety Note - Flowserve RK Série Instructions De Montage

Safety Note
The equipment must only be installed and commissioned by qualified and adequately
trained personnel. Maintenance and retrofitting must only be performed by entrusted
personnel who – through adequate training – have achieved a recognized level of
competence.
Usage for the intended purpose
The non-return valves RK are automatic-stop check valves and designed for use in
pipes in order to prevent the backflow of fluid. The admissible pressure and temperature
ratings as well as the chemical and corrosive influences of the fluid on the pressure
equipment must be taken into account. Check the chemical resistance and suitability of
the valve for the operating conditions in question.
Attention
The name plate specifies the technical characteristics of the equipment.
Do not commission or operate a device without a name plate!


