Dometic GROUP WAECO PerfectView M70IP Instructions De Montage Et De Service page 39

PerfectView M70IP
Adjusting the monitor (fig. 0, page 6)
8.4
To set the monitor to suit your requirements, proceed as follows:
➤ Press the "M" button (3) to call up the required parameters.
✓ The parameters to be set appear in the following order:
Picture:
– Brightness: 0 – 100
– Contrast: 0 – 100
– Colour: 0 – 100
– Volume: (chapter "Volume setting" on page 40)
– Automatic brightness adjustment ("Auto Dim"): ON/OFF
– Set the distance markers ("Scale adjust"): (chapter "Setting the distance markers
(fig. 0, page 6)" on page 41)
Options ("Option"):
– Language ("Lang"): English/Deutsch/Français/Español/Português/Italiano/Neder-
lands/
– Distance markers ("Scale"): ON/OFF
– Camera1/Camera2/Camera3 ("CAM1/CAM2/CAM3"): "Normal" or "Mirrored"
System:
– Video standard ("Color-Sys"): Auto/PAL/NTSC
– Screen background without the camera signal blue/black ("Blue Back"): On/OFF
– Flip horizontal ("Horizontal")
– Flip vertical ("Vertical")
– Aspect ratio ("Zoom"): 16:9 or 4:3
Auto search ("Auto Scan"):
– Automatic scan ("Auto Scan"): ON/OFF
– Scan time: 1 – 90 s
– Camera1/Camera2/Camera3 ("CAM1/CAM2/CAM3"): ON/OFF
➤ Press the "–" button (5) to reduce the value of the selected parameter.
➤ Press the "+" button (6) to increase the value of the selected parameter.
➤ Press the "M" button (2) to switch to or exit the respective menu.
➤ Press the "S" button (3) to exit the menu.
EN
(chapter "Setting the language (fig. 0, page 6)" on page 38)
Using the LCD monitor
39