Product Information; Technical Specifications - VONROC CD802AA Traduction De La Notice Originale

for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use a ex-
tension cable reel, always fully unroll the cable.

2. PRODUCT INFORMATION

Intended use
Charge only CD801AA and CD803AA type rechargea-
ble Battery packs with the charger. Other types ofbat-
teries may burst causing personal injury and damage.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The batteries of the VONROC POWER 20V battery
platform are interchangeable with all the VONROC
POWER 20V battery platform tools.

TECHNICAL SPECIFICATIONS

Model No
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2.
1. Battery unlock button
2. Battery LED indicators button
3. Battery LED indicators
4. Battery (not included)
5. Charger
6. Charger LED indicators
3. OPERATION
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
WWW.VONROC.COM
1. Insert the battery (4) into the base of the machine
2. Push the battery further forward until it clicks
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (1).
2. Pull the battery out of the machine like shown in
Charging the battery with the charger (Fig. A)
1. Take the battery (4) from the machine.
2. Turn the battery (4) to upside down position and
3. Push the battery until it is fully pushed into the
4. Plug the charger plug into an electrical outlet
CD802AA
220-240V,50Hz 0.4A
The charger has 2 LED indicators (6) which indica-
21V 2.5A
te the status of the charging process:
60 minutes
120 minutes
Red LED Status
CD801AA, CD803AA
Off
0.36 kg
Off
On
• Fully charging the 2Ah battery may take up to
• Fully charging the 4Ah battery may take up to
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
as shown in Fig. B.
into place.
Fig. B.
slide it onto the charger (5) as shown in Fig. A.
slot.
and wait for a while. The LED indicators on the
charger (6) will lighten up and show the charger
status.
Green LED status
Off
On
Off
60 minutes.
120 minutes.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
EN
Charger status
No power
Standby mode:
- No battery is
inserted or,
- Battery inserted
but charging has
finished
Battery charging in
progress
5