The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Risk of Electrocution
Electric Shock
Operate With Two Hands
No Hands Symbol
Keep Bystanders Away
Gloves
V
Volts
A
Amperes
Hz
Hertz
W
Watt
hrs
Hours
Class II Construction
SYMBOLS
MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1. Wear head protection when operating this equip-
ment above shoulder level.
Do not expose to rain or use in damp locations.
DANGER! Risk of electrocution! Keep tool 50 feet away from electri-
cal lines.
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Hold and operate the hedge trimmer properly with both hands.
Failure to keep your hands away from the blade will result in serious
personal injury.
Keep all bystanders at least 50 ft. away.
Wear non-slip, heavy-duty protective gloves when handling the
hedge trimmer.
Voltage
Current
Frequency (cycles per second)
Power
Time
Double-insulated construction
4 – English
DESIGNATION/EXPLANATION