Unpacking; Requirements On The Installation Location; Prior To First Use - GRAFF MS 701 Instructions D'utilisation

liquid can escape from the unit.
Do not use the stainless steel tank while on a hot plate or cooking
•
plate. Use the stainless steel tank only in connection with the base
station.
Never touch rotating parts of the unit.
•
Never leave the unit unsupervised during operation.
•
Fill the unit only up to the MAX mark. If overfilled, hot liquid can
•
escape from the tank.
Let the unit cool off before cleaning.
•
Switch the unit off before cleaning and pull the power cord from
•
the electric socket.
Never immerse the base unit, the connection cable or the connec-
•
tion plug into water or any other fluid.
Do not clean the base unit in the dishwasher.
•

UNPACKING

Proceed as follows to unpack the unit:
•
Pull the unit out of the cardboard box.
•
Remove all packaging and possible stickers on the unit (do not remove the name
plate).

REQUIREMENTS ON THE INSTALLATION LOCATION

For safe and fault-free operation of the unit, the following has to observed during
installation:
•
Use a firm, even, horizontal, non-slip and heat resistant surface with a sufficient
load capacity.
•
Select an installation location in such a way that children cannot reach any hot
surfaces of the unit.
•
The unit is not designed for installation in a wall or a built-in cupboard.
•
Do not set up the unit in a hot, wet or moist environment.
•
The power outlet must be easily accessible so that the power cable can be quickly
removed in case of emergency.

PRIOR TO FIRST USE

Before using the unit for the first time, clean as described in the Cleaning chapter.
DE
EN
FR
NL
IT
15