Klimawatt EuroCave Pure Mode D'emploi page 37

6 - C
OMMISSIONING YOUR WINE CABINET
IV-A. Description (multi-temperature model S-Pure-S, S-Pure-M, S-Pure-L)
A B C D
O N
A
Lighting mode
B
C
Temperature zones concerned
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Confirmation and setting access key
H
Setting and selection keys
IV-B. Temperature setting
Recommended temperature setting range for the lowest temperature: 7 - 9 °C / 45 - 48 °F.
Recommended temperature setting range for the highest temperature: 17 - 20 °C / 63- 68 °F.
Press and hold down the key for 5 secs to power up.
1
Press and hold down the
The display will start to flash.
3
Press the button to confirm.
The right-hand display will flash.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
E F C
M L
5 sec.
key for approximately 5 secs.
G H I
K J
I
Lighting mode access and confirmation key
J
Charcoal filter meter access key
K
Power button
L
Highest temperature in cabinet display
M
Hot circuit indicator
N
Cold circuit indicator
O
Lowest temperature in cabinet display
2
Press the or
4
Press the or
5
Press the button to confirm.
•
•
•
N.B: in order to operate correctly, your cabinet must be placed in a room
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
keys to set the desired temperature.
keys to set the desired temperature.
GB