Before First Use; Installation Instructions - tomado 30 Lt. Minibar Manuel D'utilisation

Before first use

 Remove all packaging materials.
 Check for completeness and damage that may have occurred while transporting the
product. In case of damage or incomplete delivery, please contact your dealer
( Guarantee).
 Clean the appliance ( Cleaning and maintenance).
 Make sure all parts of the appliance are completely dry.
 Place the appliance on a horizontal, stable, and heat-resistant surface. Make sure
the refrigerator is in the horizontal position; adjust the height if necessary with the
adjustable feet (3).
 Ensure that there is sufficient ventilation. Keep a minimum distance of 2cm
between the product and other objects or walls.
Note: After moving the refrigerator, allow it to sit in an upright position for 20 to
30 minutes prior to plugging it into a power outlet.

Installation instructions

Ideas for saving energy
 Locate the product in the coolest part of the room, out of direct sunlight,and away
from sources of heat. If this is not possible, a section of cabinetry or an added layer
of insulation will help the refrigerator operate more efficiently.
 Level the refrigerator so that the door closes tightly.
 From time to time, adjust the temperature inside the refrigerator, since it changes
along with:
 the room temperature
 the frequency at which the refrigerator door is opened and how long it
stays open
 the items inside
 Place the product 2cm away from the wall.
 Do not cover the product's ventilation openings.
Installation inside a closet
When placing the
refrigerator inside a closet
or on a shelf, keep a fixed
distance between the
refrigerator and all the
walls. For details, refer to
the illustrations below:
GB
5 P2M041STD – Ver.1.1