Table des Matières
Publicité
OBJ_BUCH-1401-003.book Page 17 Tuesday, February 24, 2015 11:26 AM
Corded Straight Screwdrivers with Lever Start
Article number
– Europe: 0 602 495 ...
Rated voltage
Nominal current
No-load speed
Max. torque for hard/soft screwdriving application according to ISO 5393
Rotational direction
Marking ring
Max. screw dia.
Weight according to EPTA-Procedure 01/2003
Degree of protection
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-2:
Screwdriving without impact: a
<2.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-2.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Bosch Power Tools
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 24.02.2015
2
2
, K= 1.5 m/s
.
Assembly
Disconnect the power supply before making any ad-
justments, changing accessories, or placing the ma-
chine aside. This safety measure prevents accidental
starting of the power tool.
Operating and Storage Environment
The device is suitable exclusively for operation at enclosed
work sites.
For trouble-free operation of the device, the allowed ambient
temperature should lie between –5 °C and +50 °C (23 °F
and 122 °F) at an allowed relative humidity of between 20
and 95 %, free of dew.
The corded straight screwdriver should be stored at a temper-
ature between –20 °C (–4 °F) and 70 °C (158 °F), in order
to prevent damage to the electronics.
Suspension Device
With the utility clip 8, the machine can be attached to a sus-
pension device.
Regularly check the condition of the utility clip and the
hook of the suspension device.
Changing the Tool
Inserting
Pull the quick-change chuck 3 to the front. Insert the tool 1 in-
to the tool holder 2 and release the quick-change chuck.
Use only insertion tools with fitting end pieces
(1/4" hexagonal).
English | 17
C-EXACT 6
C-EXACT 6
... 210
V
36
A
1.0
-1
min
1000
Nm
1.0–6.0
1.0–6.0
in-lbs
8.9–53.1
8.9–53.1
black
M 5
kg
0.7
lbs
1.4
IP 20
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 136 | (24.2.15)
... 211
36
1.0
500
black
M 5
0.7
1.4
IP 20
Publicité
Table des Matières
