Loading Paper; Cut Sheet Paper; Menu Description - Tally T2240/9 Manuel D'utilisation

Loading paper

Loading paper

Cut Sheet paper

Paper Tray
10
Access
Cover
Only use paper which is suitable for this printer. For more information, refer to the online
documentation on the CD-ROM, Appendix C (Specification).
Cut Sheet Paper is to be inserted from the front of the printer. The post-print paper can be fed out
from the rear or the front. Please refer to the online documentation on the CD-ROM, Chapter 1,

Menu description

table.
Power Switch
Paper Extension Trays
When the Ink-ribbon Cartridge setting is complete, attach the
Access Cover.
Set the Paper Thickness Adjustment Lever in accordance with
the thickness of the paper to be used. Refer to page 18
the print head gap).
Turn the Power Switch of the printer ON ("|").
Adjust the Paper Thickness Lever according to the type of paper
to be used. Refer to page 18 (Setting the print head
Stand the Paper Tray up in the direction indicated by the arrow.
While holding the Paper Tray, pull up the Paper Extension
Trays.
Quick start-up
(Setting
gap).