Technical Data - HAEGER GH-42B.002A Mode D'emploi

• There is some air present in the cylinder, hold the control knob down for a
longer period of time until the pilot and main burner light. Switch to the 3
High setting.
• The cylinder may have been excessively cold. Allow the cylinder to reach
room temperature before attempting to start the heater.
The heater turns off by itself:
• If the heater goes out on continuous working, repeat the operation,
following the instruction.
• If it goes out soon after lighting, check for drafts or for the gas cylinder
running out of gas.
• If it goes out after 30 minutes or so, it is signaling that it is operating in a
badly ventilated area. Open a window or door to ventilate the area and
reignite.
• Avoid bumping the heater in operation. Don't move the heater while in
operation.

Technical Data

Model: ................................................... GH-42B.002A
Category: ............................................. I
Burner type: .......................................... Ceramic burner
Gas Type: .............................................. Butane (G30), Propane (G31)
Pressure: ................................................ Butane at 28-20mbar, Propane at 37mbar
Injector size: .......................................... 0,59mm
Countries of Destination: .................... PT, ES, FR, GB
Total heat input (ΣQn): ....................... 4.2 kW (consumption 305 g/h)
Nominal medium heat input: ............ 2.9 kW (consumption 210 g/h)
Nominal minimum heat input: .......... 1.5 kW (consumption 109 g/h)
Ignition system: .................................... Piezo ignition
Gas container: ..................................... up to 15kg
P.I.N Code: ........................................... 2531CS-0008
Dimensions: ........................................... 420 x 290 x 720 mm
Net / Gross Weight: ............................. 7.8 kg / 9 kg
Instructions for use
(28-30/37)
3+
English
9