Initial Setup - Mammut Barryvox S Mode D'emploi

INITIAL SETUP

Batteries
Only use alkaline (LR03/AAA) or lithium (LR92/AAA) batteries
of the same type. Always insert 3 new batteries of the same
type. In case these batteries need to be removed, the same
3 batteries or 3 new batteries must be reinserted. Never use
rechargeable batteries and always replace all the batteries at
the same time.
Make sure the lid is properly closed and that the device and the
batteries stay dry.
1
Use a fi ngernail or the leash clip to slide battery door to the left,
and it will swing open.
BARRYVOX ® S USER MANUAL
Periodically inspect the battery compartment. Clean or dry it, if
needed, since moisture can cause corrosion.
Avoid touching the contacts with your hands, use a clean cloth.
A reliable power supply is crucial for safe operation.
When storing or not using the transceiver for an extended
period of time (summer, travelling, shipping), remove
alkaline as well as lithium batteries and leave the battery
compartment open. The warranty becomes void if batteries
have leaked!
2
2
EN
27