Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GENERAL SAFETY
RULES .......................................
...............................................
.................................................................
...............................................................
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and operating instructions before using any tool or equipment.
When using tools or equipment, basic safety precautions should always be followed to reduce
the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious
injury and property damage. There are certain applications for which tools and equipment are designed. DELTA
strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written DELTA
and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at Technical Service Manager, DELTA
Equipment Corporation, 2651 New Cut Road, Spartanburg, SC 29303.
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
•
Safety Requirements for Woodworking Machines
• U.S. Department of Labor regulations www.osha.gov
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY
and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
indicates a potentially haz ard ous situation which, if not avoided, may result in minor or mod er ate injury.
indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•
lead from lead-based paints,
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved safety equipment, al ways wear NIOSH/OSHA approved,
ting face mask or res pi ra tor when us ing such tools.
TABLE OF CONTENTS
....................
2
.....................
2
3
...............
4
....................................
6
6
7
7
SAVE THESE INSTRUCTIONS!
..........................................................
.....................................................................
..........................................................
WARRANTY ................................................................
FRANÇAIS
..................................................................
ESPAÑOL
...................................................................
2
................................................
Power Equipment Corporation
®
Power Equipment Corporation
®
Power
®
www.ansi.org - ANSI 01.1
15
15
17
18
18
19
36
.
Publicité
Table des Matières
Dépannage
