Preparation - Neptune 061-100-066 Mode D'emploi

User Manual
EN
FireWare Neptune Training Extinguishers
8
9
FireWare NeptuneTraining Extinguisher Push Button (025-100-022/025-100-030)
1. Cylinder
2. Push Button
3. Circlip
4. Valve
5. Filling valve
6. Pressure gauge
7. Hose coupling
8. Hose
9. Spray nozzle with squeeze handle

Preparation :

Several classifi cation stickers are included and separate magnetic plates. You can choose whether you
stick one classifi cation sticker directly on the extinguisher, or whether you stick the classifi cation stick-
ers on the magnetic plates. If you stick the stickers on the magnetic plates, you can easily change the
classifi cation of the training extinguisher during a workout.
You can mount the FireWare Training Neptune Extinguisher on the wall with the included suspension
bracket. It is advisable to always use a conduit locator before drilling or screwing.
Take note: make sure the bracket is mounted and anchored with the correct mounting material. The
provided bracket is intended for a solid wall surface (for example brick, concrete or wall blocks).
Take note: The wall surface should not display any weaknesses, like cracking or peeling plaster.
Mounting against a cavernous wall is strongly discouraged. If you nevertheless want to mount the
bracket to a cavernous wall, we advise that you locate the solid laths in the construction and ask your
builders market for the correct mounting materials.
16 FireWare Training Extinguishers
7
BAR
3
2
1 5
6
4
www.FireWare.nl