Atlas Filtri OASIS DR RO Instructions D'installation page 8

2.5.2 Drain bracket installation
Install the drain bracket on the sink drain siphon.
Make sure the gasket correctly rests on the pipe and that the bolts are tight.
Remove the drain pipe fastening nut.
Using a drill with a 6mm bit, drill a hole on the drain siphon pipe where the nut was just removed.
Insert the drain pipe in the nut by about 2 cm and screw the fastening nut onto the bracket.
Tighten the fastening nut and install the check valve with the arrow facing the bracket, as close to the drain as possible.
1 Drain pipe
2 Quick coupling
3 Drain bracket
4 Gasket
5 Bolt
6 Bolt lock nut
7 Sink drain siphon pipe
|
8 OASIS DP RO
2
3
5
Ø 8 mm
1
4
7
6