Barloworld Scientific stuart SC6 Manuel D'utilisation page 2

English
Magnifier position
Sensitivity adjustment
Mains ON/OFF switch
Figure 1: SC6 controls
Background
adjustment
Dish adapters
Figure 2: Underneath the SC6
Control panel
Thank you for purchasing this piece of
Barloworld Scientific equipment. To get the
best performance from the equipment, and
for your own safety, please read these
instructions carefully before use.
This equipment is designed to operate under the
following conditions:-
❖ For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature range +5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Overvoltage category II IEC60364-4-443
❖ Pollution degree 2 IEC664
If the equipment is not used in the manner
described in this manual the protection provided
by the equipment may be impaired.
Receiver
plate