D. MAINTENANCE OF THE SIDE BRUSHES
Keep the side brush against the base of the robot vacuum, and unscrew the fastening screw using a
Phillips screwdriver. To finalize the maintenance of the underside of the e.ziclean® SLIM SERIES, use
the cleaning accessory.
When the side brushes appear damaged, it is possible to return them to their original shape by
soaking them in water for a few minutes.
E. CLEANING THE FRONT WHEEL
In order to disassemble the front wheel module, create a leverage effect, by inserting a Flathead
screwdriver between the base of the device and the wheel compartment.
The non-slip rubber wheel can also be disassembled from its module using leverage with a flat-head
screwdriver.
Once the wheel compartment, and the wheel itself are cleaned, reposition everything by pressing
the wheel onto its module, and the module onto the base of the device.
19
.EN.
Tips