Utilization Of Kiddy Click'n Move 3 With Infant Carrier; Attaching/Removing The Infant Carrier Adaptors - KIDDY Click'n Move 3 Guide D'utilisation

EN
WARNING
Before using the pram body make sure that:
- the cover is correctly re-installed and all snap
fastener and zippers are correctly closed
-the carrying belts are placed correctly
-the mattress is inside

6.Utilization of Kiddy click'n Move 3 with infant carrier

6.1 Attaching/removing the infant carrier adaptors

WARNING
Ensure that the parking brake is activated after
unfolding the chassis as described in point 3.1.
Insert both plugs of the infant carrier adapter on the left and right support on the
chassis until they lock into the place and sit tight (fig. 44; no. 1) and the indication
at locking button is "green" (fig. 44; no. 2).
WARNING
Before installing of infant carrier seat make
sure that both looking buttons indicate "green".
When the locking buttons indicate "red", pull
these upwards, so that "green" will be indicated.
test by pulling upwards whether the infant car-
rier adapters are locked in place and tightly con-
nected to the chassis.
52 52