Attaching/Removing The Rear Wheels; Attaching/Removing The Front Wheels - KIDDY Click'n Move 3 Guide D'utilisation

WARNING
the chassis is completely flat foldable , when the
push chair seat is mounted in driving direction.

3.3 Attaching/removing the rear wheels

To mount a rear wheel keep the locking button pressed (fig 5; no. 1) and push the
axle in the hub of the chassis (fig 5; no. 2).
WARNING
test whether both rear wheels are locked in
place and tightly connected to the chassis by
pulling them to the outside.
To remove a rear wheel, keep the locking button pressed (fig. 6; no. 1) and pull the
wheel outwards (fig. 6; no. 2).

3.4 Attaching/removing the front wheels

To mount a front wheel keep the locking button pressed (fig. 7; no. 1) push the
vertical axle in the holding bracket of the chassis (fig. 7; no. 2).
WARNING
test whether both front wheels are locked in
place and tightly connected to the chassis by
pulling them downwards.
To remove a front wheel, keep the locking button pressed (fig. 8; no. 1) and pull
the wheel downwards (fig. 8; no. 2)
EN
41 41